800 334 3750
3-layer Barricade™ - Super-lightweight, rip stop nylon makes the Elite Jacket one of our lightest jackets, while still offering superb waterproofing for active, outdoor and travel.
The Elite jacket is our lightest 3-layer waterproof, highly engineered to provide excellent protection from the elements. The ideal take-along for hillwalking, biking or commuting.
It’s made using a super-light polyamide rip stop outer, bonded to our high-spec Barricade™ membrane and a fine tricot lining. It is seam-sealed for complete waterproof protection, and offers high wind resistance and superb breathability.
The hood is a deconstructed version of our famously functional One-Pull™ concept. It cinches, as you might expect, with one simple pull. It has a stiffened and wired peak to provide unimpeded vision and to help you angle it against the rain. It can also be rolled down when not in use and secured into position by passing the tab inside the collar through the fabric loop on the back of the hood. The hem and sleeve cuffs are also adjustable to allow you to fine tune the fit and limit any wind-chill.
On the outside, there’s two zipped hand pockets. On the inside, there’s a zipped security pocket to help protect your valuables, and of course, it doubles up as a Packpocket™. The jacket rolls down tiny so it can be kept in your bag as a just-in-case measure for whenever the weather turns.
Our Barricade™ waterproof fabric achieves an initial Hydrostatic Head (waterproofness rating) of 20,000 and a Moisture Vapour Transmission rating for breathability of 20,000 g/m2/24h - a very balanced position.
A further Durable Water Repellency™ finish boosts water repellency of the fabric surface and maintains 80% of its effectiveness after twenty washes.
An investment in a long-term high performing jacket for intense activity offering the lightest weight and the smallest pack size.
The water repellent face fabric and the waterproof-breathable membrane are bonded together with a lightweight wicking scrim - the three layers are sandwiched together.
Read more about our Barricade Technology
Washing Instructions Caring for your Rohan Barricade™ waterproof will improve its performance and longevity. Simply machine wash your item at 30C with a gentle non-biological, liquid detergent. We recommend a second rinse to remove all traces of detergent from the fabric. Don’t use fabric conditioners, dryer sheets, stain removers or bleaching agents as these can impair the fabric performance. Garments may be drip dried. To rejuvenate the finish tumble dry your waterproof on the coolest setting, ensuring it is fully dry to complete the process.
Your Barricade™ waterproof has a Durable Water Repellency finish on the surface of the fabric. Over time, with wear and exposure to the environment, this can degrade, stopping water beading up on the surface of the jacket. Cleaning your waterproof will help maintain the finish. If necessary a re-proofing product, such as Grangers Clothing Wash + Repel, may be used to restore the DWR. This can be used in your wash cycle and is activated by a cool tumble dry.
Fabric: 100% polyamide with Barricade™ membrane technology and Durable Water Repellency™.
Pack Size: 850ml
Drying Time: 5 hours
Cutting down windchill can make more difference to your comfort and safety than the amount of insulation you are wearing. Garments that carry this icon are Highly Wind Resistant.
Wet clothing transmits body heat nearly twenty-five times faster than dry. All clothing with this symbol is guaranteed to be totally waterproof. And highly breathable membrane technology means that you won’t get wet from inside either.
Pocket science at Rohan is all about precision and detail of design, but most of all, it’s about keeping your most important stuff safe at times when losing keys, passports and wallet is more than just an inconvenience. We use several different methods – whichever is the most appropriate. Some pockets are completely hidden with micro zips, some are touch and close with roll-over tops and some are high quality zips.
Good design is more often about what to take off than what to put on. And clever design is about giving one feature two functions, that’s why many Rohan garments feature an internal mesh stretch pocket that doubles as a Packpocket™ for easy storage.
By painstakingly stripping out unnecessary fabric and avoiding the common practice of double fabric panels we gain many advantages. The clothing is lighter and less bulky as well as quicker drying and more breathable. And because our fabrics are super tough, functionality can be improved by stripping away anything that doesn’t really need to be there.
We were the original lightweight revolutionaries. Back in the 1970’s we realised that cutting weight without losing performance meant that you can take less and do more. Everything we make is engineered to achieve this.
Low pack size is a benefit whether you’re packing for a day’s walking or for the trip of a lifetime. We continually scrutinise fabric specification and garment construction to minimise the packed size of our clothing. The actual pack size is tested and listed.
All Rohan clothing is designed to be very fast drying – as much a benefit for unexpected downpours as anything else. It’s easy to wash and often needs no ironing. Almost all garments will dry overnight, meaning you can take less with you. We test every item and list its drying time.
Conventional waterproof fabrics cannot adapt to the changing weather outside and the changing micro-climate inside. Barricade™ is different, it is dynamic and responds to your body temperature and the humidity of the surrounding environment. The sweatier and steamier things get inside, the better the membrane works and the more vapour escapes.
Our durable water resistant finish, which forces water droplets to ‘bead up’ and run off the outside of the jacket, is designed to remain at 80% efficiency – even after 20 washes.
There’s no such thing as bad weather, just the wrong clothing. Rohan is your constant companion for every journey, whatever the journey.